app_using:tina2 []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====TINA2 3D Printer Printing by Poloprint APP=====

Download Android poloprint:\\
<WRAP center round download 40%>\\
[[http://www.weedo.ltd/?page_id=3376&orderby=title&order=asc|Android poloprint]]
</WRAP>



====1.Go to the menu bar and click : Control Interface - Network Settings====
{{:upgrade_wifi_firmware:wifi-1.jpg?direct&400|}}
{{:upgrade_wifi_firmware:wifi-2.jpg?direct&400|}}
{{:upgrade_wifi_firmware:wifi-3.jpg?direct&400|}}
{{:app_using:5g.jpg?direct&400|}}
====2.Get into poloprint APP, choose 'device's wifi setting'====
{{:app_using:设置wifi.png?direct&400|}}

It will show the IP address in the APP

{{:app_using:ip-phone.png?direct&400|}}

You can also see the IP address on the screen of the printer
{{:app_using:marlin信息界面-wifi.jpg?direct&400|}}

====3.Printing via APP====

The APP main interface displays the cloud model file for the user to select the model to be printed. After selecting the model to be printed, click the model icon, the print button will appear in the lower right corner, and you can download and upload the model for printing.

{{:app_using:screenshot_2019-09-23-15-31-25-610_com.weedo.polo.png?direct&400|}}

Print the Gcode-file in TF card via the app

{{:app_using:sd卡_file.jpg?direct&400|}}

====4.Printer control and Management====
Poloprint can control and manage your printers.

{{:app_using:控制.jpg?direct&400|}}

{{:app_using:ip-right.png?direct&400|}}

User Tools

Site Tools

Page Tools