content:how_to_connect_tina2_to_wiibuilder []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== How to connect printer to Wiibuilder ======

**If you still have questions, please contact our customer service. Email:support@weedo3d.com**\\
\\
=====The first way : The network connection=====

Step1: After configuring the network through Wiibuilder or Manual editing, obtain the IP address.（See “Set Up Wi-Fi Network” ）\\
{{:content:图片_1.png?400|}}\\
\\
Step2: Open the Wiibuilder. Click“WLAN Connection”, enter or choose the IP address, click"Connect".\\
{{:content:屏幕截图_2022-05-07_134517.png?400|}}\\
{{:content:屏幕截图_2022-05-07_134410.png?400|}}\\
\\
===== The second way : USB cable connection =====

Step1: Connect the printer and computer with a USB cable.\\
\\ 
Step2: You need to download the CH340 driver (on the download page) for the first connection.\\
{{:x40:0419_8.png?400|}}\\
\\
Step3: Open the Wiibuilder. Click“WLAN Connection”,choose "COM3"for Windows  or "/dev/*****" for MacOS, click "Connect".\\
{{:content:屏幕截图_2022-05-07_134517_2.png?400|}}\\
{{:content:屏幕截图_2022-05-07_134716.png?400|}}\\
\\

===== The reason for the failure to connect to the network =====

  - It is not possible to use the 5GWiFi network. It needs to operate at 2.4 GHz network frequency.
  - Please turn off VPN.
  - Please turn off Windows defender settings, make sure the 3D printer and computer are the same subdomain.
  - Mobile phones need to be operated with WIFI.The 3D printer and phones need to use the same subdomain.
  - Keep the TF card inserted.
  - WiFi name cannot be used in Chinese.
==== How to turn off Windows defender ====
Method 1:Turn off all defender\\
Method 2:Allow Wiibuilder through defender\\
{{:content:5.png?400|}}

User Tools

Site Tools

Page Tools