=====Y belt tension adjustment=====

----

====Loosen the screw that holds the motor====

Take out the 2.0mm L-shaped wrench from the accessory box and loosen the four screws that hold the motor.\\


{{:daily_maintenance:pasted:20200910-011212.png}}


====Adjust belt tightness====

Belt tightening： Hold the motor by hand, pull the motor backward to keep the Y belt tight, and then tighten the four screws.\\

Loosen the belt： Hold the motor by hand, pull the motor forward as a whole, loosen the Y belt slightly, and then tighten the four screws\\