====Instructions for refresh your firmware====
\\
Step1: Turn on your F192 printer, connect the printer to your computer with the USB cable from accessory box.\\
{{:faq:p20.png?nolink|}}\\
\\
Step2: Double click the below [[http://www.weedo.ltd/?wpdmpro=weedo-f192-firmware-1-0-7|firmware]] updater, see below photo:\\
{{:faq:p21.png?nolink|}}\\
{{:faq:p22.png?nolink|}}\\
\\
Step3: \\
Use a screwdriver or some tools to press the reset button which on the right side of the printer, and DO NOT RELEASE.\\
{{:faq:p23.png?nolink|}}\\
\\
Step4: \\
Click the “update” button AND release the reset button IMMEDIATELY. Now you will see uploading, see below photo.\\
{{:faq:p24.png?nolink|}}\\
{{:faq:p25.png?nolink|}}\\
\\
Wait until the upload is completed： \\
{{:faq:p26.png?nolink|}}\\
\\
Step5: \\
After all this done, go back to the screen and click the “restore factory”, then shut down your printer. After a few seconds, restart your printer. Now resetting process is finished!\\
{{:faq:p27.png?nolink|}}\\