Differences

This shows you the differences between two versions of the page.

--- firmware:how_to_update_firmware [2020/06/10 11:35]
127.0.0.1 external edit
+++ firmware:how_to_update_firmware [2020/09/21 13:45] (current)
@@ Line 1: / Line 1: @@
-=====Install Printer Drive=====
+=====How to refresh Firmware?=====
-If you are using a computer to connect to a WEEDO 3D printer for the first time. Please install the printer USB driver first.
+----
+**Install USB Driver**\\
-Download USB driver for windows:[[http://www.weedo.ltd/?wpdmpro=usb-driver-for-windows|External Link]]
+If you are using a computer to connect to a WEEDO 3D printer for the first time. Please install the printer USB driver first.\\
-After the driver is successfully installed, connect the printer and turn on the power. In the device manager of the operating system, a device named USB-SERIAL CH340 will appear under the port device (the corresponding port number, COMx, each computer will be different).
-{{:firmware:设备管理器.png?400|}}
+<WRAP center round download 60%>\\
+[[https://drive.google.com/file/d/16HiJlPduXiwvqa_e4pAPiBadzSMuYkDg/view?usp=sharing|CH341 USB drive_Windows]]
+</WRAP>\\
-----
+<WRAP center round download 60%>\\
+[[https://drive.google.com/file/d/1Yu4AaNJvHvWYgKjTwcLS5xZ9PTrcA_fK/view?usp=sharing|CH341 USB drive_MacOS]]
+</WRAP>
-=====Firmware upgrade method 1=====
-Install the latest version of Wiibuilder software (version ≥ 2.0.6). After opening the software, click the first icon on the toolbar to open the serial connection window. Select the port number corresponding to the printer and click the Connect button.
-Wiibuilder 2.0.6[[http://www.weedo.ltd/?wpdmpro=wiibuilder2-0-6-0|External Link]]
+After the driver is successfully installed, connect the printer and turn on the power. In the device manager of the operating system, a device named USB-SERIAL CH340 will appear under the port device (the corresponding port number, COMx, each computer will be different).
-When Wiibuilder connects to the printer, it automatically detects if the firmware needs to be updated. When new firmware is found, the following prompt will appear.
+{{:firmware:设备管理器.png?400|}}
-{{:firmware:finder_firmware.png?400|}}
+----
-Click "Yes" and Wiibuilder will automatically download the new firmware and install it into the printer.
+=====Firmware update method=====
-{{:firmware:updating_auto.png?400|}}
+**Firmware tool:**\\
-It takes about 2 minutes to update the firmware.
+<WRAP center round download 60%>\\
+[[https://drive.google.com/file/d/1t0s1mdra6TuIhYMGg6tFfD2V315dpYns/view?usp=sharing|Firmware tool]]
-===This method can automatically detect the printer firmware version and automatically update to the latest version, recommended for ordinary users!===
+</WRAP>
 ----
-=====Firmware upgrade method 2=====
-Download the 3D printer firmware upgrade special program from the official website. Different versions of different models correspond to independent firmware upgrade programs. For details, please refer to the firmware download page of each model.
-{{:firmware:update.png?400|}}
+**How to update Firmware?**\\
-Open the firmware upgrade special program, select the port number corresponding to the printer, and click the Update button. Wait about 2 minutes and the update is complete.
+{{pdfjs 800px > :user_manual:update_the_firmware.pdf}}
 ===Please note! This method updates the printer firmware to any version and carefully checks the model before updating. Brushing the wrong firmware will damage the printer hardware, please use it with caution!===

User Tools

Site Tools

Differences

Page Tools