For more products please visit http://www.weedo.ltd / https://www.weedo3d.com
Sidebar
firmware:how_to_update_firmware
This is an old revision of the document!
Install Printer Drive
If you are using a computer to connect to a WEEDO 3D printer for the first time. Please install the printer USB driver first.
After the driver is successfully installed, connect the printer and turn on the power. In the device manager of the operating system, a device named USB-SERIAL CH340 will appear under the port device (the corresponding port number, COMx, each computer will be different).
Firmware upgrade method
Please note! This method updates the printer firmware to any version and carefully checks the model before updating. Brushing the wrong firmware will damage the printer hardware, please use it with caution!
firmware/how_to_update_firmware.1592217949.txt.gz · Last modified: 2020/09/21 13:43 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
