Differences

This shows you the differences between two versions of the page.

--- firmware:tina2 [2019/09/26 11:05]
peter
+++ firmware:tina2 [2022/02/08 21:03] (current)
caojie
@@ Line 1: / Line 1: @@
-**WEEDO TINA FIRMWARE UPDATE**
+===== WEEDO TINA2 Firmware Update =====
 ----
+==== V2.16 (2022.2.2) ====
+**Update content:**\\
-**V2.9 (2019.09.22)**
+**1. Added alternate display of print time and remaining print time during printing.**
-update content:
+**2.Solve TF card compatibility issues.**
-  - Compatible with the SparkOne network control box, the communication baud rate is 1000000bps.
-  - When the printer performs automatic wire feeding or automatic wire retracting, click the button to immediately stop the operation.
+**3.Solve the problem of incomplete gocde file information in the print information preview interface.**
-  - Reduce the extrusion speed when the printer automatically feeds the wire.
+**4.Resolved an issue where printing pause still displayed on the screen after resuming printing.**
+\\
+<WRAP center round download 60%>\\
+[[http://www.weedo.ltd/download/weedotina2_v2-16-0/|TINA2 FirmwareV2.16]]
+</WRAP>
+\\
+----
+==== V2.11 (2019.11.10) ====
+**Update content:**\\
+**1. A host communication mode setting menu is added to the control interface.**
+The corresponding communication rate of Wiibuilder is 1000000bps and the corresponding communication rate of SparkOne is 57600bps.\\
+The firmware's default communication rate is 1000000bps. If you want to connect to SparkOne, you need to enter the host communication mode setting menu and select SparkOne.\\
+**2. Full support for Spark network control boxes.**
+When connecting and disconnecting Spark, a prompt message is displayed on the screen.\\
+When Spark prints online, press the control key to display the online print menu, you can control to pause or cancel printing.\\
+During printing, the progress and elapsed time are displayed on the screen.\\
+After the Spark interface cancels printing, the printer automatically restarts and resets.\\
+\\
+<WRAP center round download 60%>\\
+[[http://www.weedo.ltd/?wpdmpro=weedotina2_v2-11|TINA2 FirmwareV2.11]]
+</WRAP>
+\\
+**Note: The original Octoprint system or the older version of SparkOne system need to be set according to the following tutorials to achieve all the above functions**\\
+<WRAP center round tip 60%>\\
+[[:octoprint_connect_tina2|How to Connect TINA2 To Octoprint]]
+</WRAP>
+\\
+\\
+----
+==== V2.10 (2019.10.07) ====
+**update content:**\\
+. Before printing starts, add the gcode file slice information interface (only the gcode files generated by Wiibuilder V2.0.6 and later versions, including complete slice information)\\
+. Add serial number display function in network device information interface\\
+. Add resume interface to improve the positioning accuracy of resume\\
+\\
+<WRAP center round download 60%>\\
+[[http://www.weedo.ltd/?wpdmpro=firmware-of-weedo-tina2_v2-9-2|TINA2 FirmwareV2.10]]
+</WRAP>
+\\
+----
+==== V2.9 (2019.09.22) ====
+**update content:**\\
+. Compatible with the SparkOne network control box, the communication baud rate is 1000000bps.
+[[:octoprint_connect_tina2|How to Connect TINA2 To Octoprint]]\\
+. When the printer is in the process of automatically feeding or unwinding, click the button to stop the operation immediately\\
+. Reduce the extrusion speed when the printer automatically feeds yarn\\
+\\
+<WRAP center round download 60%>\\
+[[http://www.weedo.ltd/?wpdmpro=firmware-of-weedo-tina2_v2-9|TINA2 FirmwareV2.9]]
+</WRAP>
+\\
+----
+==== V2.8 (2019.09.05) ====
+**update content:**\\
+. Add WIFI network setting function through TF card file\\
+. The file list is changed to paging mode, which solves the problem of slow refresh of the file list\\
+\\
+<WRAP center round download 60%>\\
+[[http://www.weedo.ltd/?wpdmpro=firmware-of-tina2_v2-8|TINA2 FirmwareV2.8]]
+</WRAP>
+----

User Tools

Site Tools

Differences

Page Tools