how_to_use_duplication_printing_mode:printing_setting []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====Download Stl File & Print Out File=====

====1.Download STL File====
Go through [[http://https://www.thingiverse.com/|thingiverse]] for free STL file download.\\

{{:print_your_first_sliced_model:pasted:20200828-012411.png}}\\

Search the file you are like and download it.

{{:print_your_first_sliced_model:pasted:20200828-012442.png}}
 
====2.Load file into Wiibuilder====
{{:print_your_first_sliced_model:pasted:20200828-012634.png}}
 
====3.Set slicing parameters====

Click Edit, click Material to select the right nozzle, and select a benefit color to simulate the color effect of the model.\\

{{:print_your_first_sliced_model:pasted:20200828-012735.png}}\\
 

Select the slice settings. Sets the Profile, to select the material type.\\

For example Profile: High Quality; Material: PLA; Layer Height:0.15mm; Printing Speed:55; infill:10% ;Temp:200\\

{{:print_your_first_sliced_model:pasted:20200828-013004.png}}\\

Slice it and save to TF card, you can see the printing time and filament used for this model\\

{{:print_your_first_sliced_model:pasted:20200828-013110.png}}\\

====4. Insert TF card to Machine and select the Gcode file printing====

{{:print_your_first_sliced_model:pasted:20200828-013205.png}}\\

{{:print_your_first_sliced_model:pasted:20200828-013225.png}}\\

You can preview information of the printing file before printing. 

{{:print_your_first_sliced_model:pasted:20200828-013244.png}}\\

**Select Dual Mode**\\

Choose Duplication or Mirrored, You can print two models at once, make sure the both of the nozzles have loaded with filament.
{{:how_to_use_duplication_printing_mode:pasted:20200828-013750.png}}

 
{{:print_your_first_sliced_model:pasted:20200828-013416.png}}

User Tools

Site Tools

Page Tools