Differences

This shows you the differences between two versions of the page.

--- octoprint:f152s [2020/09/27 13:15]
peter created
+++ octoprint:f152s [2020/09/27 13:21] (current)
peter
@@ Line 1: / Line 1: @@
-======OctoPrint连接F152S教程======
+======OctoPrint connection F152S tutorial======
 \\
-SparkOne中运行的OctoPrint，在出厂时已配置好打印机参数和通讯参数，不需要做任何更改就可以直接使用。\\
+The OctoPrint, running in SparkOne has been configured with printer parameters and communication parameters at the factory and can be used directly without any changes.\\
-如果OcotPrint的运行设置文件config.yaml丢失，或是你想要从自己安装的OctoPrint中连接WEEDO F152S，请按以下步骤进行配置:\\
+If the running settings file config.yaml for OcotPrint is missing, or if you want to connect to WEEDO F152S from the OctoPrint you installed, follow these steps to configure:\\
 \\
-====添加F152S机型配置====
+====Add F152S model configuration====
 \\
-. 进入OctoPrint设置界面，在PRINTER->Printer Profiles菜单中点击Add Profile。\\
+. Go to the OctoPrint settings interface and click Add Profile in the PRINTER- > Printer Profiles menu.\\
 \\
 {{ :octoprint_connect_tina2_03.png?nolink |}}
 \\
-. 在General窗口中输入，Name:F152S，Model:WEEDO F152S。\\
+. Enter Name: F152S, Model:WEEDO F152S in the General window.\\
 \\
 {{ ::octoprint_f152s_02.png?nolink |}}
 \\
-. 在Print bed & build volume窗口中，将X, Y, Z轴长度分别改为200mm，185mm，195mm，在Heated bed前打上勾。\\
+. In the Print bed & build volume window, change the length of the X, Y, Z axis to 200mm, 185mm, 195mm, and tick before Heated bed.\\
 \\
 {{ ::octoprint_f152s_03.png?nolink |}}
 \\
-. 在Axes窗口中，将X, Y轴的速度改为4000，选择Z轴的Invert control。点击Save，保存退出。\\
+. In the Axes window, change the speed of the X and Y axes to 4000, and select the Invert control of the Z axis. Click Save, to save and exit.\\
 \\
 {{ ::octoprint_f152s_04.png?nolink |}}
 \\
 \\
-====添加串口波特率====
+====Add serial baud rate====
 \\
-进入OctoPrint设置界面，在PRINTER->Serial connection->General菜单中找到Additional baud rates，输入1000000。点击Save，保存退出\\
+Go to the OctoPrint settings interface and find Additional baud rates, input 1000000 in the PRINTER- > Serial connection- > General menu. Click Save, to save and exit\\
 {{ :octoprint_connect_tina2_01.png?nolink |}}
 \\
 \\
-====打开与F152S的通讯====
+====Open the communication with F152S====
 \\
-. 用USB线连接F152S和SparkOne，打开F152S电源，点击主界面Connection右边的刷新按键，在Serial Port下拉菜单中选择/dev/ttyUSB0，在Baudrate下拉菜单中选择1000000。\\
+. Connect F152S and SparkOne, with USB cable to power on F152S, click the refresh button on the right side of the main interface Connection, select / dev/ttyUSB0, from the Serial Port drop-down menu and select 1000000 from the Baudrate drop-down menu.\\
 {{ :octoprint_connect_tina2_02.png?nolink |}}
 \\
-. 在Printer Profile下拉菜单中选择F152S，在Save connection settings和Auto-connect on server startup前打上勾。\\
+. Select F152S from the Printer Profile drop-down menu and tick before Save connection settings and Auto-connect on server startup.\\
 \\
 {{ ::octoprint_f152s_01.png?nolink |}}
 \\
-. 点击Connect按键，切换到Terminal窗口可查看串口的通讯情况。如果连接正常，打印机会自动重启一次，并在Terminal窗口中输出打印机的参数信息。\\
+. Click the Connect button and switch to the Terminal window to view the communication of the serial port. If the connection is normal, the printer automatically restarts and outputs the printer's parameter information in the Terminal window.。\\
 \\
 {{ :octoprint_connect_tina2_09.png?nolink |}}
 \\
-接下来，你就可以使用SparkOne来控制F152S了LOL
+Next, you can use SparkOne to control F152S, LOL.

User Tools

Site Tools

Differences

Page Tools