Differences

This shows you the differences between two versions of the page.

--- octoprint_connect_f152s [2019/11/22 16:53]
peter
+++ octoprint_connect_f152s [2020/09/21 13:45] (current)
@@ Line 18: / Line 18: @@
 {{ ::octoprint_f152s_03.png?nolink |}}
 \\
-. In the Axes window, change the speed of the X and Y axes to 4000 and select the Invert control of the Z axis. Click Save to save and exit.\\
+. In the Axes window, change the speed of the X and Y axes to 4000 and select the Invert control of the Z-axis. Click Save to save and exit.\\
 \\
 {{ ::octoprint_f152s_04.png?nolink |}}
@@ Line 29: / Line 29: @@
 \\
 \\
-====打开与F152S的通讯====
+====Turn on communication with the F152S====
 \\
-. 用USB线连接F152S和SparkOne，打开F152S电源，点击主界面Connection右边的刷新按键，在Serial Port下拉菜单中选择/dev/ttyUSB0，在Baudrate下拉菜单中选择1000000。\\
+. Connect the F152S and SparkOne with a USB cable, turn on the F152S power supply, click the refresh button on the right side of the main interface Connection, select /dev/ttyUSB0 in the Serial Port drop-down menu, and select 1000000 in the Baudrate drop-down menu.\\
 {{ :octoprint_connect_tina2_02.png?nolink |}}
 \\
-. 在Printer Profile下拉菜单中选择F152S，在Save connection settings和Auto-connect on server startup前打上勾。\\
+. Select F152S in the Printer Profile drop-down menu and check the Save connection settings and Auto-connect on server startup.\\
 \\
 {{ ::octoprint_f152s_01.png?nolink |}}
 \\
-. 点击Connect按键，切换到Terminal窗口可查看串口的通讯情况。如果连接正常，打印机会自动重启一次，并在Terminal窗口中输出打印机的参数信息。\\
+. Click the Connect button and switch to the Terminal window to view the serial port communication. If the connection is normal, the printer will automatically restart once and output the printer's parameter information in the Terminal window.\\
 \\
 {{ :octoprint_connect_tina2_09.png?nolink |}}
 \\
-接下来，你就可以使用SparkOne来控制F152S了LOL
+Next, you can use SparkOne to control the F152S. LOL

User Tools

Site Tools

Differences

Page Tools