print_with_nylon_filament:printing_setting_f152s []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====F152S Print with Nylon Filament=====

**1. Import the STL model file that needs to be printed into the slicing software Wiibuilder**\\

{{:print_with_pc_filament:pasted:20200927-034059.png}}

**2. Click the Edit icon in the lower right corner**\\

{{:print_with_pc_filament:pasted:20200927-034235.png}}

After the mouse clicks on the model name: the model can be edited, and the model can be enlarged or reduced according to the scale or size.\\

Select the material color you want to print, and the rendering color of the model changes accordingly.\\

{{:print_with_pc_filament:pasted:20200927-040029.png}}

**3. Click on the top of the software to slice settings**\\

Set printing consumables to Nylon, choose print mode: very fast-fast-normal-high precision-ultra-high precision: choose whether to add support, the model does not need to add support, so choose None.\\

{{:print_with_nylon_filament:pasted:20200927-040906.png}}

**4. Click slicing**\\

{{:print_with_pc_filament:pasted:20200927-040316.png}}

After the slicing is completed, the lower right corner will display the estimated printing time of the model and the weight of consumables used. Click the save icon above, copy the sliced Gcode file into the TF card, and then insert the TF card into the card slot on the right side of the printer. Please pay attention to the direction of the card before inserting the card!\\

User Tools

Site Tools

Page Tools