User Tools

Site Tools

Trace: • printing_setting
print_your_first_sliced_model:printing_setting_f152s

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

print_your_first_sliced_model:printing_setting_f152s [2020/09/25 15:46]
peter created 		print_your_first_sliced_model:printing_setting_f152s [2020/09/27 11:53] (current)
peter
Line 11: Line 11:
    
 ====2.Load file into Wiibuilder==== ====2.Load file into Wiibuilder====
-{{:print_your_first_sliced_model:pasted:20200828-012634.png}}+ 
 +{{:print_your_first_sliced_model:pasted:20200927-045232.png}}
    
 ====3.Set slicing parameters==== ====3.Set slicing parameters====
Line 17: Line 18:
 Click Edit, click Material to select the right nozzle, and select a benefit color to simulate the color effect of the model.\\ Click Edit, click Material to select the right nozzle, and select a benefit color to simulate the color effect of the model.\\
  
-{{:print_your_first_sliced_model:pasted:20200828-012735.png}}\\+{{:print_your_first_sliced_model:pasted:20200927-045245.png}}\\
    
  
 Select the slice settings. Sets the Profile, to select the material type.\\ Select the slice settings. Sets the Profile, to select the material type.\\
  
-For example Profile: High Quality; Material: PLA; Layer Height:0.15mm; Printing Speed:55; infill:10% ;Temp:200\\+For example Profile: High Quality; Material: PLA; Layer Height:0.2mm; Printing Speed:55; infill:10% ;Temp:200\\
  
-{{:print_your_first_sliced_model:pasted:20200828-013004.png}}\\+{{:print_your_first_sliced_model:pasted:20200927-045311.png}}\\
  
 Slice it and save to TF card, you can see the printing time and filament used for this model\\ Slice it and save to TF card, you can see the printing time and filament used for this model\\
  
-{{:print_your_first_sliced_model:pasted:20200828-013110.png}}\\+{{:print_your_first_sliced_model:pasted:20200927-045333.png}}\\
  
 ====4. Insert TF card to Machine and select the Gcode file printing==== ====4. Insert TF card to Machine and select the Gcode file printing====
  
-{{:print_your_first_sliced_model:pasted:20200828-013205.png}}\\ 
- 
-{{:print_your_first_sliced_model:pasted:20200828-013225.png}}\\ 
- 
-You can preview information of the printing file before printing.  
- 
-{{:print_your_first_sliced_model:pasted:20200828-013244.png}}\\ 
- 
-**Select Print**\\ 
-  
-{{:print_your_first_sliced_model:pasted:20200828-013416.png}} 
    
print_your_first_sliced_model/printing_setting_f152s.1601019966.txt.gz · Last modified: 2020/09/25 15:46 by peter

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki