=====Download Stl File & Print Out File=====

====1.Download STL File====
Go through [[http://https://www.thingiverse.com/|thingiverse]] for free stl file download.\\

{{:print_your_first_sliced_model:pasted:20200828-012411.png}}\\

Search the file you are like and download it.

{{:print_your_first_sliced_model:pasted:20200828-012442.png}}
 
====2.Load file into Wiibuilder====

{{:print_your_first_sliced_model:pasted:20200927-045232.png}}
 
====3.Set slicing parameters====

Click Edit, click Material to select the right nozzle, and select a benefit color to simulate the color effect of the model.\\

{{:print_your_first_sliced_model:pasted:20200927-045245.png}}\\
 

Select the slice settings. Sets the Profile, to select the material type.\\

For example Profile: High Quality; Material: PLA; Layer Height:0.2mm; Printing Speed:55; infill:10% ;Temp:200\\

{{:print_your_first_sliced_model:pasted:20200927-045311.png}}\\

Slice it and save to TF card, you can see the printing time and filament used for this model\\

{{:print_your_first_sliced_model:pasted:20200927-045333.png}}\\

====4. Insert TF card to Machine and select the Gcode file printing====