Differences

This shows you the differences between two versions of the page.

--- set_up_wifi_network:tina2 [2019/09/27 09:32]
peter
+++ set_up_wifi_network:tina2 [2022/05/18 11:11] (current)
ayumi
@@ Line 1: / Line 1: @@
-=====Set up Wi-Fi network：=====
+======Set up Wi-Fi network======
-====Notices for Network Setting：====
+===== Notices for Network Setting： =====
+  - It is not possible to use the 5GWiFi network. It needs to operate at 2.4 GHz network frequency.
   - Mobile phones need to be operated with WIFI
   - Local WiFi connection recommendation should not exceed 10 devices
-  - It is not possible to use the 5GWiFi network. It needs to operate at 2.4 GHz network frequency.
   - When installing, you need to give the mobile APP network location permission.
   - Printers need to be connected in a good network environment (mobile WIFI interface can be used to check whether the network environment is generally above)
   - WiFi name cannot be used in Chinese
-  - If you have any questions about the printer, please contact us. Our email address is：salesservice@wiibooxtech.com
+  - If you have any questions about the printer, please contact us. Our email address is：support@weedo3d.com
-====Method 1. Using the APP distribution network====
-====Download the Andriod APP-Poloprint1.3.1 for the first time====
+===== Method 1:Set up WiFi with Wiibuilder(Windows) =====
-App download: [[http://www.weedo.ltd/?page_id=3376&orderby=title&order=asc|External Link]]
-===After the download is completed, the installation is completed. After the installation is completed, the first time the application is opened, the interface is displayed. The wizard interface is an introduction to the use of instructions on the app. The specific usage requires a tutorial corresponding to the specific model. This tutorial is for Tina2===
+You can also use the Wiibuilder to set the IP for your printer.\\
-===Step 1: Enter the WIFI password in the network where the mobile APP brush WIFI settings interface (do not click OK first)===
+\\
+Step1: After the computer is connected to the 2.4G network, open the Wiibuilder,choose "TINA2"printer.\\
+\\
+Step2: Click “WLAN Connection”-“WiFi Profile”.\\
+{{:content:2022-05-07_102755.png?400|}}\\
+{{:content:2022-05-07_102907.png?400|}}\\
+\\
+Step3: Enter your network password，click “Save”, save to TF card.\\
+{{:set_up_wifi_network:0421_8.png?400|}}\\
+\\
+Step4: Turn on the 3D printer，print"wifi.gcode".\\
+{{:content:2022-5-7-1.png?400|}}\\
+\\
+Step5: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
+===== Method 2: Manual editing =====
+Step1:Download this ".gcode"\\
+{{ :content:wifi.gcode_11.08.51.zip |}}\\
+\\
+Step2: Enter your home 2.4G network name and network password, save to TF card.\\
+{{:content:截屏2022-05-07_11.48.14.png?400|}}\\
+{{:content:截屏2022-05-07_11.48.49.png?400|}}\\
+\\
+Step3: Turn on the 3D printer，print “wifi.gcode”.\\
+{{:content:2022-5-7-1.png?400|}}\\
+\\
+Step4: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
+\\
+===== Method 3: Using the APP distribution network =====
+Step1: Download the Andriod APP-Poloprint for the first time.\\
+{{ :content:poloprintpro1.1.1-1019.apk.zip |}}\\
+\\
+Step2: Search the network for the corresponding serial number.\\
+{{:content:screenshot_20220507_152457_com.android.settings.jpg?400|}}\\
+\\
+\\
+Step3: After the download is completed, the installation is completed.Open the APP，click"Printer wifi Setting",enter your home 2.4G network name and network password\\
+{{:content:图片16.png?400|}}\\
+\\
+Step4: Restart the machine. After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
+\\

User Tools

Site Tools

Differences

Page Tools