set_up_wifi_network:tina2 []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Set up Wi-Fi network======

===== Notices for Network Setting： =====

  - It is not possible to use the 5GWiFi network. It needs to operate at 2.4 GHz network frequency.
  - Mobile phones need to be operated with WIFI
  - Local WiFi connection recommendation should not exceed 10 devices
  - When installing, you need to give the mobile APP network location permission.
  - Printers need to be connected in a good network environment (mobile WIFI interface can be used to check whether the network environment is generally above)
  - WiFi name cannot be used in Chinese
  - If you have any questions about the printer, please contact us. Our email address is：support@weedo3d.com

===== Method 1:Set up WiFi with Wiibuilder(Windows) =====

You can also use the Wiibuilder to set the IP for your printer.\\
\\
Step1: After the computer is connected to the 2.4G network, open the Wiibuilder,choose "TINA2"printer.\\
\\
Step2: Click “WLAN Connection”-“WiFi Profile”.\\
{{:content:2022-05-07_102755.png?400|}}\\
{{:content:2022-05-07_102907.png?400|}}\\
\\
Step3: Enter your network password，click “Save”, save to TF card.\\
{{:set_up_wifi_network:0421_8.png?400|}}\\                                                                                                               
\\
Step4: Turn on the 3D printer，print"wifi.gcode".\\
{{:content:2022-5-7-1.png?400|}}\\
\\
Step5: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.

===== Method 2: Manual editing =====
Step1:Download this ".gcode"\\
{{ :content:wifi.gcode_11.08.51.zip |}}\\
\\
Step2: Enter your home 2.4G network name and network password, save to TF card.\\
{{:content:截屏2022-05-07_11.48.14.png?400|}}\\  
{{:content:截屏2022-05-07_11.48.49.png?400|}}\\                                                                                                         
\\
Step3: Turn on the 3D printer，print “wifi.gcode”.\\
{{:content:2022-5-7-1.png?400|}}\\
\\
Step4: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
\\
===== Method 3: Using the APP distribution network =====
Step1: Download the Andriod APP-Poloprint for the first time.\\
{{ :content:poloprintpro1.1.1-1019.apk.zip |}}\\
\\
Step2: Search the network for the corresponding serial number.\\
{{:content:screenshot_20220507_152457_com.android.settings.jpg?400|}}\\
\\
\\
Step3: After the download is completed, the installation is completed.Open the APP，click"Printer wifi Setting",enter your home 2.4G network name and network password\\
{{:content:图片16.png?400|}}\\
\\
Step4: Restart the machine. After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
\\
User Tools

Site Tools

Page Tools
