======Set up Wi-Fi network====== ===== Notices for Network Setting: ===== - It is not possible to use the 5GWiFi network. It needs to operate at 2.4 GHz network frequency. - Mobile phones need to be operated with WIFI - Local WiFi connection recommendation should not exceed 10 devices - When installing, you need to give the mobile APP network location permission. - Printers need to be connected in a good network environment (mobile WIFI interface can be used to check whether the network environment is generally above) - WiFi name cannot be used in Chinese - If you have any questions about the printer, please contact us. Our email address is:support@weedo3d.com ===== Method 1:Set up WiFi with Wiibuilder(Windows) ===== You can also use the Wiibuilder to set the IP for your printer.\\ \\ Step1: After the computer is connected to the 2.4G network, open the Wiibuilder,choose "TINA2"printer.\\ \\ Step2: Click “WLAN Connection”-“WiFi Profile”.\\ {{:content:2022-05-07_102755.png?400|}}\\ {{:content:2022-05-07_102907.png?400|}}\\ \\ Step3: Enter your network password,click “Save”, save to TF card.\\ {{:set_up_wifi_network:0421_8.png?400|}}\\ \\ Step4: Turn on the 3D printer,print"wifi.gcode".\\ {{:content:2022-5-7-1.png?400|}}\\ \\ Step5: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen. ===== Method 2: Manual editing ===== Step1:Download this ".gcode"\\ {{ :content:wifi.gcode_11.08.51.zip |}}\\ \\ Step2: Enter your home 2.4G network name and network password, save to TF card.\\ {{:content:截屏2022-05-07_11.48.14.png?400|}}\\ {{:content:截屏2022-05-07_11.48.49.png?400|}}\\ \\ Step3: Turn on the 3D printer,print “wifi.gcode”.\\ {{:content:2022-5-7-1.png?400|}}\\ \\ Step4: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen. \\ ===== Method 3: Using the APP distribution network ===== Step1: Download the Andriod APP-Poloprint for the first time.\\ {{ :content:poloprintpro1.1.1-1019.apk.zip |}}\\ \\ Step2: Search the network for the corresponding serial number.\\ {{:content:screenshot_20220507_152457_com.android.settings.jpg?400|}}\\ \\ \\ Step3: After the download is completed, the installation is completed.Open the APP,click"Printer wifi Setting",enter your home 2.4G network name and network password\\ {{:content:图片16.png?400|}}\\ \\ Step4: Restart the machine. After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen. \\