User Tools

Site Tools

Trace: • simplify3d
soft:simplify3d

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
soft:simplify3d [2020/06/11 18:56]
peter created 		soft:simplify3d [2020/09/21 13:45] (current)
Line 1: Line 1:
 +=====User manual=====
  
-~~NOTOC~~+**You have purchased our home-grade 3D printer LOL. Here is how to import simplify3d profile if you want to use simplify3d**
  
-====== Simplify3D ======+{{pdfjs 800px > :user_manual:simplify3dprofileinstruction.pdf}}
  
----- +**If you still have questions, please contact our customer service. Email:salesservice@wiibooxtech.com** 
- + --- //[[peter@wiibooxtech.com|peter]] 2020/06/11 01:41//
-===== Profile ===== +
- +
-<WRAP group> +
-<WRAP column half> +
- +
- +
-==== Import FFF Profile ==== +
-  - Download **{{:slicers:s3d:mp_mini_delta_-_simplify3d_profiles_-_20171223_-_stock_g29.zip|Simplify3D Profiles for the MP Mini Delta 3D Printer}}**. +
-  - Extract the contents of the downloaded zip file. +
-  - Click **//<color #CC2255>File</color>//** from the menu bar. +
-  - Click **//<color #CC2255>Import FFF profile</color>//** from the **//<color #CC2255>File</color>//** drop-down. +
-  - Choose the **//<color #CC2255>MP Mini Delta - Simplify3d Profile - 20171223 - Stock G29.fff</color>//** file from the download location. +
-  - Click **//<color #CC2255>Open</color>//**. +
-    - A dialog box is displayed letting you know the import was successful and that the profile is now available. Click **//<color #CC2255>OK</color>//**. +
-  - The profile is now ready to be used. +
-  - Optional: If trying to connect via USB see the [[slicers:s3d#connection_failed_message|instructions below]] if getting "Connection failed". (Windows only at this time. :-()  +
- +
-The new profile will be available in the "Select Profile:" drop down within the "FFF Settings"/Process window. +
- +
-</WRAP> +
- +
- +
- +
-<WRAP column half> +
- +
- +
-<WRAP left round download 90%> +
-**{{:slicers:s3d:mp_mini_delta_-_simplify3d_profiles_-_20171223_-_stock_g29.zip|Simplify3D Profile for the MP Mini Delta 3D Printer}}** \\ +
-with Stock Start & End Scripts \\ +
-December 23, 2017 \\ +
-//Contains fff & frm file.// +
-//Added more print quality settings (layer heights).// +
-</WRAP> +
- +
-</WRAP> +
-</WRAP> +
- +
----- +
- +
-===== Connection Failed Message ===== +
- +
-Do you keep getting the "Connection failed" message when try to connect your Mini Delta via USB even though the printer is detected by S3D. +
- +
-<code> +
-"Attempting connection at \\.\COM5... +
-   Testing plaintext communication protocol... +
-   Testing binary communication protocol... +
-   Testing alternate communication protocols... +
-   Connection failed." +
-</code> +
- +
-This may help with that. Simplify3D needs a small change made to the "Flow Control" setting located in the "Advanced" section of the "Communications" tab which can be found in the "Firmware Configuration" settings. The "Flow Control" drop-down has three options: +
-  * No Flow Control +
-  * Hardware Flow Control (RTS/CTS) +
-  * Software Flow Control (XON/XOFF) +
- +
-Choosing either the hardware or software options seems to work.  +
-The only difference made in the S3D firmware profile is to the "Flow Control" setting which is set to "Hardware Flow Control (RTS/CTS)". +
- +
-<WRAP group> +
-<WRAP column half> +
- +
- +
-==== Import FRM Profile ==== +
- +
-=== Windows === +
-  - Download this **{{:slicers:s3d:s3d_firmware_profile_mp_mini_3d_printers.zip|Simplify3D Firmware Profile}}**. +
-  - Extract the contents of the downloaded zip file. +
-  - Click **//<color #CC2255>Tools</color>//** from the menu bar. +
-  - Click **//<color #CC2255>Firmware Configuration</color>//** from the **//<color #CC2255>Tools</color>//** drop-down. +
-  - Click **//<color #CC2255>Import</color>//**. +
-  - Choose the **//<color #CC2255>MP Mini 3D Printers.frm</color>//** file from the download location. +
-  - Click **//<color #CC2255>Save</color>//**. +
-    - If a warning dialog box is displayed, read the warning message and click **//<color #CC2255>Okay</color>//**. +
-  - Locate the **//<color #CC2255>Processes</color>//** section. +
-  - Click **//<color #CC2255>Edit Process Settings</color>//** to open the **//<color #CC2255>FFF Settings</color>//** window. +
-  - Choose your printers profile from the **//<color #CC2255>Select Profile:</color>//** drop-down. +
-  - Click the **//<color #CC2255>Show Advanced</color>//** button. +
-  - Switch to the **//<color #CC2255>G-Code</color>//** tab. +
-  - Locate the **//<color #CC2255>Update Firmware Configuration</color>//** section. +
-  - Choose **//<color #CC2255>MP Mini 3D Printers.frm</color>//** from the **//<color #CC2255>Firmware type</color>//** drop-down. +
-  - Click **//<color #CC2255>Update Profile</color>//** which is located next to the **//<color #CC2255>Select Profile:</color>//** drop-down. +
-  - Click **//<color #CC2255>OK</color>//**. +
- +
-<WRAP center round download 85%> +
-**{{:slicers:s3d:s3d_firmware_profile_mp_mini_3d_printers.zip|Simplify3D Firmware Profile for MP Mini 3D Printers}}** \\ +
-<wrap lo>//This firmware profile will allow S3D to connect to the MP Select Mini V2 and MP Mini Delta. \\ +
-(MP Select Mini V1 connects with or without this firmware.)//</wrap> +
-</WRAP> +
- +
- +
-</WRAP> +
- +
-<WRAP column half> +
- +
- +
- +
-/* +
-{{ :slicers:s3d:s3d_firmware_import_and_connect_usb.gif?direct |Click on the image (GIF) to view full size in a new browser tab}} +
-[[https://mpminidelta.com/_media/slicers/s3d/s3d_firmware_import_and_connect_usb.gif|Click on the image (GIF) above to view full size in a new browser tab]] +
-*/ +
- +
-{{youtube>Ne75gnvZnOc?medium}} +
- +
-YouTube link:  [[https://youtu.be/Ne75gnvZnOc|Fix Simplify3D USB "Connection Failed" for MP Select Mini V2 & MP Mini Delta (Windows OS only)]] +
- +
-/* +
-{{youtube>Ne75gnvZnOc?medium}} +
-*/ +
- +
-</WRAP> +
-</WRAP> +
- +
----- +
- +
-=== macOS === +
-<WRAP round info 45%> +
-**<wrap lo>//This will temporarily connect but then the printer becomes unresponsive.//</wrap>** +
-</WRAP> +
- +
- +
-  - Click **//<color #CC2255>Tools</color>//** from the menu bar. +
-  - **//<color #CC2255>Firmware Configuration</color>//** from the **//<color #CC2255>Tools</color>//** drop-down. +
-  - Switch to the **//<color #CC2255>Communication</color>//** tab +
-  - Locate the **//<color #CC2255>Communication Settings</color>//** section. +
-  - Uncheck **<color #026CF5>▢</color>** **//<color #CC2255>Wait for startup command</color>//**. +
-  - Click **//<color #CC2255>Save</color>//** and a warning dialog box will appear. +
-  - Read the warning message and click **//<color #CC2255>Okay</color>//**.+
soft/simplify3d.1591872981.txt.gz · Last modified: 2020/09/21 13:43 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki