User Tools

Site Tools

Trace: • notform • simplify3d

Sidebar

Translations of this page:

Welcome to WEEDO3D printers

For more products please visit http://www.weedo.ltd / https://www.weedo3d.com

WEEDO TINA2 3D PRINTER

ME40Pro WIKI

X40/X40V2 WIKI

F152S WIKI

F192C WIKI

M2 WIKI

soft:simplify3d

This is an old revision of the document!

Simplify3D

Profile

Import FFF Profile

  1. Download Simplify3D Profiles for the MP Mini Delta 3D Printer.
  2. Extract the contents of the downloaded zip file.
  3. Click <color #CC2255>File</color> from the menu bar.
  4. Click <color #CC2255>Import FFF profile</color> from the <color #CC2255>File</color> drop-down.
  5. Choose the <color #CC2255>MP Mini Delta - Simplify3d Profile - 20171223 - Stock G29.fff</color> file from the download location.
  6. Click <color #CC2255>Open</color>.
    1. A dialog box is displayed letting you know the import was successful and that the profile is now available. Click <color #CC2255>OK</color>.
  7. The profile is now ready to be used.
  8. Optional: If trying to connect via USB see the instructions below if getting “Connection failed”. (Windows only at this time. :-()

The new profile will be available in the “Select Profile:” drop down within the “FFF Settings”/Process window.

Simplify3D Profile for the MP Mini Delta 3D Printer
with Stock Start & End Scripts
December 23, 2017
Contains fff & frm file. Added more print quality settings (layer heights).

Connection Failed Message

Do you keep getting the “Connection failed” message when try to connect your Mini Delta via USB even though the printer is detected by S3D. 

"Attempting connection at \\.\COM5...
   Testing plaintext communication protocol...
   Testing binary communication protocol...
   Testing alternate communication protocols...
   Connection failed."

This may help with that. Simplify3D needs a small change made to the “Flow Control” setting located in the “Advanced” section of the “Communications” tab which can be found in the “Firmware Configuration” settings. The “Flow Control” drop-down has three options:

  • No Flow Control
  • Hardware Flow Control (RTS/CTS)
  • Software Flow Control (XON/XOFF)

Choosing either the hardware or software options seems to work. The only difference made in the S3D firmware profile is to the “Flow Control” setting which is set to “Hardware Flow Control (RTS/CTS)”.

Import FRM Profile

Windows

  1. Download this Simplify3D Firmware Profile.
  2. Extract the contents of the downloaded zip file.
  3. Click <color #CC2255>Tools</color> from the menu bar.
  4. Click <color #CC2255>Firmware Configuration</color> from the <color #CC2255>Tools</color> drop-down.
  5. Click <color #CC2255>Import</color>.
  6. Choose the <color #CC2255>MP Mini 3D Printers.frm</color> file from the download location.
  7. Click <color #CC2255>Save</color>.
    1. If a warning dialog box is displayed, read the warning message and click <color #CC2255>Okay</color>.
  8. Locate the <color #CC2255>Processes</color> section.
  9. Click <color #CC2255>Edit Process Settings</color> to open the <color #CC2255>FFF Settings</color> window.
  10. Choose your printers profile from the <color #CC2255>Select Profile:</color> drop-down.
  11. Click the <color #CC2255>Show Advanced</color> button.
  12. Switch to the <color #CC2255>G-Code</color> tab.
  13. Locate the <color #CC2255>Update Firmware Configuration</color> section.
  14. Choose <color #CC2255>MP Mini 3D Printers.frm</color> from the <color #CC2255>Firmware type</color> drop-down.
  15. Click <color #CC2255>Update Profile</color> which is located next to the <color #CC2255>Select Profile:</color> drop-down.
  16. Click <color #CC2255>OK</color>.

Simplify3D Firmware Profile for MP Mini 3D Printers
This firmware profile will allow S3D to connect to the MP Select Mini V2 and MP Mini Delta.
(MP Select Mini V1 connects with or without this firmware.)

/* Click on the image (GIF) to view full size in a new browser tab Click on the image (GIF) above to view full size in a new browser tab */

YouTube link: Fix Simplify3D USB "Connection Failed" for MP Select Mini V2 & MP Mini Delta (Windows OS only)

/*

*/

macOS

This will temporarily connect but then the printer becomes unresponsive.

  1. Click <color #CC2255>Tools</color> from the menu bar.
  2. <color #CC2255>Firmware Configuration</color> from the <color #CC2255>Tools</color> drop-down.
  3. Switch to the <color #CC2255>Communication</color> tab
  4. Locate the <color #CC2255>Communication Settings</color> section.
  5. Uncheck <color #026CF5>▢</color> <color #CC2255>Wait for startup command</color>.
  6. Click <color #CC2255>Save</color> and a warning dialog box will appear.
  7. Read the warning message and click <color #CC2255>Okay</color>.
soft/simplify3d.1591873089.txt.gz · Last modified: 2020/09/21 13:43 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki