User Tools

Site Tools

Trace: • howto_set_up_wifi_network • f152s • printing_setting • spark_app • spark_interface • printing_setting • howto_use_wiibuilder • debugging_tool • sparkone_index • f192c
spark_app

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
spark_app [2019/11/22 17:06]
peter created 		spark_app [2020/09/21 13:45] (current)
Line 1: Line 1:
-======手机APP连接Spark系统======+======Mobile app connects to Spark system======
 ---- ----
-=====Android系统 - OctoRemote===== +=====Android-OctoRemote===== 
-====OctoRemote安装与设置==== +====OctoRemote installation and setup==== 
-1. 在谷歌Play商店中搜索关键词octoremote，或从以下链接下载安装OctoRemote\\+1. Search for the keyword turbineemo in the Google Play Store, or download and install OctoRemote from the link below\\
 [[http://www.wiibooxtech.com/download/OctoRemote1.3.5.apk|OctoRemote 1.3.5]]\\ [[http://www.wiibooxtech.com/download/OctoRemote1.3.5.apk|OctoRemote 1.3.5]]\\
 \\ \\
Line 9: Line 9:
 \\ \\
 \\ \\
-2. 打开OctoRemote，在添加打印机界面，输入打印名称，例如my3dprinter\\+2. Open OctoRemote, in the Add Printer interface, enter the print name, such as my3dprinter\\
 \\ \\
 {{ :spark_android_2.jpg?nolink |}}\\ {{ :spark_android_2.jpg?nolink |}}\\
 \\ \\
 \\ \\
-3. 在IP Address栏，输入Spark网络控制盒屏幕上显示的IP地址，例如192.168.10.13\\+3. In the IP Address field, enter the IP address displayed on the Spark Network Control Box screen, such as 192.168.10.13\\
 \\ \\
 {{ :spark_android_3.jpg?nolink |}}\\ {{ :spark_android_3.jpg?nolink |}}\\
 \\ \\
 \\ \\
-4. 使用电脑打开Spark网络控制盒的页面，进入参数设置界面，FEATURES->API，屏幕上显示与API Key对应的二维码\\+4. Use the computer to open the page of the Spark network control box, enter the parameter setting interface, FEATURES-> API, and the QR code corresponding to the API Key is displayed on the screen.\\
 \\ \\
 {{ :spark_ios_16.png?nolink |}}\\ {{ :spark_ios_16.png?nolink |}}\\
 \\ \\
 \\ \\
-5. 点击OctoRemote界面上的二维码图标，用相机扫描电脑屏幕上的二维码\\+5. Click the QR code icon on the OctoRemote interface and use the camera to scan the QR code on the computer screen\\
 \\ \\
 {{ :spark_android_4.jpg?nolink |}}\\ {{ :spark_android_4.jpg?nolink |}}\\
 \\ \\
 \\ \\
-6. 点击Enable webcam右侧的按钮，打开摄像机设置选项， 将Webcam URL改为\\+6. Click the button to the right of Enable webcam to open the camera setting options, and change the Webcam URL to\\
 xxx.xxx.xxx.xxx:8080/?action=stream\\ xxx.xxx.xxx.xxx:8080/?action=stream\\
-xxx.xxx.xxx.xxx是上面的IP Address\\+xxx.xxx.xxx.xxx is the IP Address above\\
 \\ \\
 {{ :spark_android_5.jpg?nolink |}}\\ {{ :spark_android_5.jpg?nolink |}}\\
 \\ \\
 \\ \\
-7. 点击ADD PRINTER，完成打印机设置\\+7. Click ADD PRINTER to complete the printer setup\\
 \\ \\
 {{ :spark_android_6.jpg?nolink |}}\\ {{ :spark_android_6.jpg?nolink |}}\\
Line 42: Line 42:
 \\ \\
 ---- ----
-====OctoRemote功能介绍==== +====OctoRemote Features==== 
-1. 打印任务界面，显示打印机状态和当前打印任务的进度+1. Print task interface, showing the status of the printer and the progress of the current print task
 \\ \\
 {{ :spark_android_7.jpg?nolink |}}\\ {{ :spark_android_7.jpg?nolink |}}\\
 \\ \\
 \\ \\
-界面上划，是文件列表，显示Spark系统和打印机SD卡中可打印的文件\\ +The interface is sliding, and it is a file list that displays the printable files in the Spark system and the printer SD card.\\ 
-点击右下角的蓝色图标，可以上传gocde文件\\+Click the blue icon in the lower right corner to upload the gcode file\\
 \\ \\
 {{ :spark_android_8.jpg?nolink |}}\\ {{ :spark_android_8.jpg?nolink |}}\\
 \\ \\
 \\ \\
-2. 温度控制界面，设置并显示喷头与加热平台的温度变化曲线\\+2. Temperature control interface, set and display the temperature change curve of nozzle and heating platform\\
 \\ \\
 {{ :spark_android_9.jpg?nolink |}}\\ {{ :spark_android_9.jpg?nolink |}}\\
 \\ \\
 \\ \\
-3. 手动控制界面，可控制打印机的归位，打印机各运动轴的点动控制\\+3. Manual control interface, which can control the home position of the printer, and the jog control of each motion axis\\
 \\ \\
 {{ :spark_android_10.jpg?nolink |}}\\ {{ :spark_android_10.jpg?nolink |}}\\
 \\ \\
 \\ \\
-4. 通讯终端界面，显示Spark系统与打印机的实时通讯数据，也可以手动向打印机发送GCode指令\\+4. Communication terminal interface, displaying real-time communication data between the Spark system and the printer, or manually sending GCode instructions to the printer\\
 \\ \\
 {{ :spark_android_11.jpg?nolink |}}\\ {{ :spark_android_11.jpg?nolink |}}\\
 \\ \\
 \\ \\
-5. 录像管理界面，可设置自动录像的参数，以及下载已完成的录像视频文件\\+5. Recording management interface, you can set the parameters of automatic recording and download the completed recording video files\\
 \\ \\
 {{ :spark_android_12.jpg?nolink |}}\\ {{ :spark_android_12.jpg?nolink |}}\\
 \\ \\
 \\ \\
-6. 切片界面，仅在Spark系统安装切片引擎插件后才能使用\\ +6. Slice interface, only available after the Slice engine plugin is installed on the Spark system\\ 
-由于Spark系统内存有限，切片速度缓慢，建议使用Wiibuilder进行切片后一键上传至Spark系统，具体操作请参见\\ +Because the Spark system has limited memory and the slicing speed is slow, it is recommended to use Wiibuilder for slicing and upload to the Spark system with one click. For details, see\\ 
-[[spark_wiibuilder|Wiibuilder在线打印与监控]]\\+[[spark_wiibuilder|Wiibuilder online printing and monitoring]]\\
 \\ \\
 {{ :spark_android_13.jpg?nolink |}}\\ {{ :spark_android_13.jpg?nolink |}}\\
Line 82: Line 82:
 \\ \\
 ---- ----
-=====IOS系统 - OctoPad===== +=====IOS system-OctoPad===== 
-====OctoPod安装与设置==== +====OctoPod installation and setup==== 
-1. 在App Store中搜索关键词octoprint，找到OctoPod for OctoPrint并安装\\+1. Search for the keyword octoprint in the App Store, find OctoPod for OctoPrint and install\\
 \\ \\
 {{ :spark_ios_1.png?nolink |}}\\ {{ :spark_ios_1.png?nolink |}}\\
 \\ \\
 \\ \\
-2. 打开OctoPod后，点击界面右上角的加号，添加打印机\\+2. After opening OctoPod, click the plus sign in the upper right corner of the interface to add a printer\\
 \\ \\
 {{ :spark_ios_2.png?nolink |}}\\ {{ :spark_ios_2.png?nolink |}}\\
 \\ \\
 \\ \\
-3. 在Printer Name栏，输入名称，例如WEEDO 3d printer\\ +3. In the Printer Name field, enter a name, such as WEEDO 3d printer\\ 
-在Hostname栏，输入Spark网络控制盒屏幕上显示的IP地址，例如http://192.168.10.13\\+In the Hostname field, enter the IP address displayed on the screen of the Spark network control box, such as http://192.168.10.13\\
 \\ \\
 {{ :spark_ios_4.png?nolink |}}\\ {{ :spark_ios_4.png?nolink |}}\\
 \\ \\
 \\ \\
-4. 使用电脑打开Spark网络控制盒的页面，进入参数设置界面，FEATURES->API，屏幕上显示与API Key对应的二维码\\+4. Use the computer to open the page of the Spark network control box, enter the parameter setting interface, FEATURES-> API, and the QR code corresponding to the API Key is displayed on the screen.\\
 \\ \\
 {{ :spark_ios_16.png?nolink |}}\\ {{ :spark_ios_16.png?nolink |}}\\
 \\ \\
 \\ \\
-5. 点击OctoPod界面上的Scan API Key，当系统提示访问请求时，点击好\\+5. Click the Scan API Key on the OctoPod interface. When prompted for an access request, click OK.\\
 \\ \\
 {{ :spark_ios_5.png?nolink |}}\\ {{ :spark_ios_5.png?nolink |}}\\
 \\ \\
-用相机扫描API Key的二维码，API Key会自动录入OctoPod的输入框中\\+Scan the QR code of the API Key with the camera, and the API Key will be automatically entered into the input box of OctoPod\\
 \\ \\
 {{ :spark_ios_6.png?nolink |}} {{ :spark_ios_6.png?nolink |}}
 \\ \\
 \\ \\
-6. 点击界面右上角Save，保存打印机设置\\ +6. Click Save in the upper right corner of the interface to save the printer settings\\ 
-\\如果OctoPod提示"Install OctoPod plugin for OctoPrint to..."，点击Dismiss+\\If OctoPod prompts "Install OctoPod plugin for OctoPrint to ...", click Dismiss
 \\ \\
 {{ :spark_ios_7.png?nolink |}}\\ {{ :spark_ios_7.png?nolink |}}\\
Line 121: Line 121:
 \\ \\
 ---- ----
-====OctoPod功能介绍==== +====OctoPod Features==== 
-1. 打印任务界面，显示打印机状态和当前打印任务的进度\\+1. Print task interface, showing the status of the printer and the progress of the current print task\\
 \\ \\
 {{ :spark_ios_8.png?nolink |}}\\ {{ :spark_ios_8.png?nolink |}}\\
 \\ \\
 \\ \\
-2. 温度监控界面，显示喷头与加热平台的温度变化曲线\\+2. Temperature monitoring interface, showing the temperature change curve of the nozzle and the heating platform\\
 \\ \\
 {{ :spark_ios_9.png?nolink |}}\\ {{ :spark_ios_9.png?nolink |}}\\
 \\ \\
 \\ \\
-3. 自定义指令界面，需安装Custom Controls插件后才能使用\\+3. Custom command interface, you need to install Custom Controls plug-in\\
 \\ \\
 {{ :spark_ios_10.png?nolink |}}\\ {{ :spark_ios_10.png?nolink |}}\\
 \\ \\
 \\ \\
-4. 系统控制菜单，菜单功能请参见，[[spark_interface#工具栏|Spark工具栏]]\\+4. System control menu, please refer to [[spark_interface # toolbar | Spark toolbar]]\\
 \\ \\
 {{ :spark_ios_11.png?nolink |}}\\ {{ :spark_ios_11.png?nolink |}}\\
 \\ \\
 \\ \\
-5. 手动控制界面，可控制打印机的归位，打印机各运动轴的点动控制\\+5. Manual control interface, which can control the homing of the printer and the jog control of each printer's motion axis\\
 \\ \\
 {{ :spark_ios_12.png?nolink |}}\\ {{ :spark_ios_12.png?nolink |}}\\
 \\ \\
 \\ \\
-6. 通讯终端界面，显示Spark系统与打印机的实时通讯数据，也可以手动向打印机发送GCode指令\\+6. Communication terminal interface, displaying real-time communication data between the Spark system and the printer, or manually sending GCode instructions to the printer\\
 \\ \\
 {{ :spark_ios_13.png?nolink |}}\\ {{ :spark_ios_13.png?nolink |}}\\
 \\ \\
 \\ \\
-7. 文件列表界面，显示Spark系统和打印机SD卡中可打印的文件，点击右上角的加号可上传gcode文件\\+7. The file list interface displays the printable files in the Spark system and printer SD card. Click the plus sign in the upper right corner to upload the gcode file.\\
 \\ \\
 {{ :spark_ios_14.png?nolink |}}\\ {{ :spark_ios_14.png?nolink |}}\\
 \\ \\
 \\ \\
-8. 设置界面，对打印的配置文件，以及OctoPod的各项参数进行设置\\+8. Setting interface, setting the printed configuration file and various parameters of OctoPod\\
 \\ \\
 {{ :spark_ios_15.png?nolink |}}\\ {{ :spark_ios_15.png?nolink |}}\\
 \\ \\
spark_app.1574413603.txt.gz · Last modified: 2020/09/21 13:43 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki