Differences

This shows you the differences between two versions of the page.

--- spark_interface [2019/11/22 17:02]
peter created
+++ spark_interface [2020/09/21 13:45] (current)
@@ Line 1: / Line 1: @@
-=====Spark系统操作界面=====
+=====Spark system operation interface=====
-如下图所示为Spark系统的操作界面:\\
+The following figure shows the operation interface of the Spark system:\\
-  * 界面的上方是工具栏。\\
+  * Above the interface is the toolbar.\\
-  * 界面的左侧从上至下分别是设备连接栏、打印状态栏和文件管理栏。\\
+  * From the top to the bottom of the interface are the device connection bar, the print status bar, and the file management bar.\\
-  * 界面的右侧为操作面板，点击面板上方的标签可以进行切换，分别是打印状态面板、温度控制面板、手动控制面板、GCcode路径预览面板、通讯终端面板和自动录像面板。\\
+  * The right side of the interface is the operation panel. You can switch by clicking the tab above the panel. They are the print status panel, temperature control panel, manual control panel, Gcode path preview panel, communication terminal panel, and automatic recording panel.\\
-下面将进行逐一介绍。\\
+The following will be introduced one by one.\\
 {{ ::spark_main_1.png?nolink |}}
 \\
 \\
 ----
-====工具栏====
+====toolbar====
-{{ ::spark_main_12.png?nolink |}}
+{{:software_use:spark_main_12.png?400|}}
 \\
-  * 工具栏的中间部分，显示当前打印任务的进度和层信息，仅在打印过程中有效。\\
+  * The middle part of the toolbar displays the progress and layer information of the current print job, valid only during the printing process.\\
-  * 点击工具栏右侧扳手图标，将打开系统设置界面，具体使用参见，[[spark_setting|Spark系统参数设置]]。\\
+  * Click the wrench icon on the right side of the toolbar to open the system settings interface.，[[spark_setting|Spark System parameter setting]]。\\
-  * 点击工具栏右侧的电源图标，将打开系统操作菜单:
+  * Click the power icon on the right side of the toolbar to open the system operation menu:
-    * Shutdown system: 关闭Spark系统，系统关闭后请拔掉电源
+    * Shutdown system: Shut down the Spark system. Unplug the power after the system is shut down.
-    * Reboot system: 重启Spark系统
+    * Reboot system: Restart the Spark system
-    * Restart OctoPrint: 重启OctoPrint软件系统
+    * Restart OctoPrint: Restart the OctoPrint software system
-    * Restart OctoPrint in safe mode: 重启OctoPrint软件系统并进入安全模式，安全模式不会加载第三方插件。当第三方插件出现故障，导致OctoPrint无法正常启动时，可进入安全模式进行故障排除。具体操作请参见， [[https://docs.octoprint.org/en/master/features/safemode.html#how-to-start-octoprint-in-safe-mode | How to start OctoPrint in safe mode]]
+    * Restart OctoPrint in safe mode: restart the OctoPrint software system and enter safe mode. Safe mode does not load third-party plug-ins. When the third-party plug-in fails, causing OctoPrint to fail to start properly, you can enter a safe mode for troubleshooting. For details, see，:[[https://docs.octoprint.org/en/master/features/safemode.html#how-to-start-octoprint-in-safe-mode | How to start OctoPrint in safe mode]]
 \\
 \\
 ----
-====设备连接栏====
+====Device connection bar====
 \\
-设备连接栏用于设置Spark连接打印机所使用的端口和通讯速率，以及连接打印机的型号。\\
+The device connection bar is used to set the port and communication speed used by Spark to connect to the printer, as well as the model number of the connected printer.\\
 {{:spark_main_10.png?nolink|}}
 \\
-  * Serial Port: 通讯端口，默认为/dev/ttyUSB0\\
+  * Serial Port: Communication port, default is /dev/ttyUSB0\\
-  * Baudrate: 通讯速率，WEEDO打印机默认为57600\\
+  * Baudrate: Communication rate, WEEDO printer defaults to 57600\\
-  * Printer Profile: 打印机型号\\
+  * Printer Profile: Printer model\\
 \\
 ----
-====打印状态栏====
+====Print status bar====
 \\
-打印状态栏显示当前打印任务的详细信息，如文件名，打印进度，打印时间等。\\
+The print status bar displays detailed information about the current print job, such as file name, print progress, print time, etc.。\\
 {{:spark_main_7.png?nolink|}}
 \\
 ----
-====文件管理栏====
+====File management bar====
 \\
-文件管理栏显示可打印文件列表，以及上传、删除等功能。\\
+The file management bar displays a list of printable files, as well as functions such as uploading and deleting.\\
-具体操作请参见，[[spark_filemanager|Spark系统文件管理]]\\
+For details, see，[[spark_filemanager|Spark System file management]]\\
 {{:spark_main_8.png?nolink|}}
 \\
 \\
 ----
-====打印状态面板====
+====Print status panel====
 \\
-打印状态面板显示3D打印机的联机状态、当前打印任务的信息、以及打印机的实时状态数据。\\
+The print status panel displays the online status of the 3D printer, information about the current print job, and real-time status data of the printer.\\
 {{ ::spark_main_14.png?nolink |}}
 \\
-打印状态面板的操作按钮：\\
+Print the operation buttons of the status panel：\\
-  Print: 开始打印
+  Print: Start printing
-  Pause: 打印暂停
+  Pause: Print pause
-  Resume: 继续打印
+  Resume: Continue printing
-  Cancel: 取消打印
+  Cancel: Cancel printing
 \\
 \\
 ----
-====温度控制面板====
+====Temperature control panel====
 \\
-温度控制面板显示喷头及加热平台的温度变化曲线，并能手动设置喷头和加热平台的温度。\\
+The temperature control panel displays the temperature profile of the nozzle and the heating platform, and can manually set the temperature of the nozzle and the heating platform.\\
 \\
 {{ ::spark_main_2.png?nolink |}}
 \\
 ----
-====手动控制面板====
+====Manual control panel====
 \\
-手动控制面板用于控制打印机的归位，打印机各运动轴的点动控制。\\
+The manual control panel is used to control the homing of the printer and the jog control of each motion axis of the printer.\\
 \\
 {{ ::spark_main_3.png?nolink |}}
 \\
 ----
-====GCode路径预览面板====
+====GCode Path preview panel====
 \\
-GCode路径预览面板用于预览GCode中的路径信息。\\
+The GCode path preview panel is used to preview the path information in GCode.\\
-在打印过程中，可以实时显示当前打印层的路径信息。\\
+During the printing process, the path information of the current print layer can be displayed in real time.\\
 \\
 {{ ::spark_main_4.png?nolink |}}
 \\
-**请注意: 因内存限制，Spark能预览的GCode文件不能大于20M**
+**Please note: Due to memory limitations, Spark can preview GCode files no larger than 20M**
 ----
-====通讯终端面板====
+====Communication terminal panel====
 \\
-通讯终端面板显示Spark系统与打印机的实时通讯数据，也可以手动向打印机发送GCode指令。\\
+The communication terminal panel displays real-time communication data between the Spark system and the printer, and can also manually send GCode commands to the printer.\\
 \\
 {{ ::spark_main_5.png?nolink |}}
 \\
 \\
 ----
-====自动录像面板====
+====Automatic recording panel====
 \\
-自动录像面板可设置自动录像的参数，以及下载已录制完成的视频文件。\\
+The Auto Recording Panel sets the parameters for automatic recording and downloads the recorded video files.\\
-具体操作请参加，[[spark_timelapse|Spark系统打印录像管理]]。\\
+Please participate in the specific operation,[[spark_timelapse|Spark System print recording management]]\\
 \\
 {{ ::spark_main_6.png?nolink |}}
 \\

User Tools

Site Tools

Differences

Page Tools