=====Spark system video surveillance=====
====Open the Spark page====
Open the OctoPrint connection window in Wiibuilder and click Open in browser to open the main SPARK interface.\\
Or open your browser and enter http://xxx.xxx.xxx.xxx in the address bar\\
xxx.xxx.xxx.xxx is the IP address shown on the SPARK display.\\
\\
{{:spark_video_1.jpg?nolink|}}\\
\\
\\
----
====Remote manual control====
Enter the Control panel, first click the small house icon under X / Y and Z to home the XYZ axis, then you can click each arrow to manually control the nozzle movement.\\
The row of numbers below the arrow is the jog distance.\\
\\
{{:spark_video_2.jpg?nolink|}}\\
\\
\\
----
====Remote start printing====
Find the file to be printed in the file management bar, and click the print icon on the far right to start the print task immediately.\\
\\
{{:spark_video_3.jpg?nolink|}}\\
\\
\\
\\
----
====Switch monitoring screen====
Click the two small icons in the upper right corner of the print status panel to switch to full window display mode and full-screen display mode, respectively\\
\\
Full window display mode, the monitor screen fills the browser window.\\
\\
{{:spark_video_4.jpg?nolink|}}\\
\\
\\
Full-screen display mode. The monitoring screen fills the entire screen. Press the ESC key on the keyboard to exit the full-screen mode.\\
\\
{{:spark_video_5.jpg?nolink|}}\\
\\
\\
\\