User Tools

Site Tools

Trace: • tina2
sparkone_index

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
sparkone_index [2019/12/05 09:18]
peter 		sparkone_index [2020/09/21 13:45] (current)
Line 2: Line 2:
 **Welcome To Use Spark Network Control System！**\\ **Welcome To Use Spark Network Control System！**\\
 \\ \\
-The Spark system is a hardware system developed by Nanjing Proud Information Technology Co., Ltd. to provide enhanced network control functions for 3D printers.\\+The Spark system is a hardware system developed by Nanjing WEEDO 3D Technology Co., Ltd. to provide enhanced network control functions for 3D printers.\\
 Spark system uses high-performance quad-core Cortex-A7 processor, running frequency 1.2GHz, Mali400MP2 GPU, 1GB DDR3RAM, 16GB Flash, 1000M Ethernet, 802.11 b/g/n wireless network, OLED display.\\ Spark system uses high-performance quad-core Cortex-A7 processor, running frequency 1.2GHz, Mali400MP2 GPU, 1GB DDR3RAM, 16GB Flash, 1000M Ethernet, 802.11 b/g/n wireless network, OLED display.\\
 Spark's software system is based on open source[[https://octoprint.org/|OctoPrint]], It has been deeply optimized and integrated to support WEEDO's full range of printers.\\ Spark's software system is based on open source[[https://octoprint.org/|OctoPrint]], It has been deeply optimized and integrated to support WEEDO's full range of printers.\\
-Spark system and 3D printing slicing software developed by Jiangsu Weibo Shi Intelligent Technology Co., Ltd.+Spark system and 3D printing slicing software developed by Jiangsu Wiiboox Technology Co., Ltd.
 [[soft:wiibuilder|Introduction to Wiibuilder]]Deeply integrated，In Wiibuilder slice file[[spark_wiibuilder|Send a print file with one click]] can send to the Spark system and start printing automatically.\\ [[soft:wiibuilder|Introduction to Wiibuilder]]Deeply integrated，In Wiibuilder slice file[[spark_wiibuilder|Send a print file with one click]] can send to the Spark system and start printing automatically.\\
 \\ \\
Line 14: Line 14:
   * Print model online preview.   * Print model online preview.
   * Large capacity storage space up to 13GB, support Chinese file name.   * Large capacity storage space up to 13GB, support Chinese file name.
-  * Support Proud cloud platform, and third-party cloud platforms such as Polo3D and AstroPrint to realize the function of slice and download of cloud model and WAN monitoring.+  * Support Proud cloud platform, and third-party cloud platforms such as Polar3D and AstroPrint to realize the function of slice and download of cloud model and WAN monitoring.
   * Support Proud 3D printing cluster management system, providing cloud slicing, print queue, print log and report, multi-user multi-level permissions, automatic information push, and other functions.   * Support Proud 3D printing cluster management system, providing cloud slicing, print queue, print log and report, multi-user multi-level permissions, automatic information push, and other functions.
  
sparkone_index.1575508729.txt.gz · Last modified: 2020/09/21 13:43 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki