Differences

This shows you the differences between two versions of the page.

--- upgrade_wifi_firmware:tina2 [2019/09/26 13:25]
peter created
+++ upgrade_wifi_firmware:tina2 [2020/09/21 13:45] (current)
@@ Line 1: / Line 1: @@
-www
+=====Update Wi-Fi firmware=====
+====1.Under the situition of TINA2 connected to network, go to Control Panel → Network Settings → Wifi Device OTA====
+{{:upgrade_wifi_firmware:marlin信息界面-wifi.jpg?direct&400|}}
+{{:upgrade_wifi_firmware:wifi-1.jpg?direct&400|}}
+{{:upgrade_wifi_firmware:wifi-2.jpg?direct&400|}}
+{{:upgrade_wifi_firmware:wifi-3.jpg?direct&400|}}
+====2. If there is no new WIFI firmware, the screen prompts No new firmware found.====
+{{:upgrade_wifi_firmware:ota.jpg?direct&400|}}
+====3. If there is new WIFI firmware, Begin ota updating... will be prompted on the screen.====
+Wait 1 minute, after the firmware upgrade is complete, the screen will prompt OTA update completed.
+If the screen prompts Firmware Upgrades Failed or more than 3 minutes, the upgrade does not end, please turn off the printer power, wait 10 seconds, then try again.