upgrade_wifi_firmware:tina2 []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====Update Wi-Fi firmware=====
====1.Under the situition of TINA2 connected to network, go to Control Panel → Network Settings → Wifi Device OTA====
{{:upgrade_wifi_firmware:marlin信息界面-wifi.jpg?direct&400|}}
{{:upgrade_wifi_firmware:wifi-1.jpg?direct&400|}}
{{:upgrade_wifi_firmware:wifi-2.jpg?direct&400|}}
{{:upgrade_wifi_firmware:wifi-3.jpg?direct&400|}}
====2. If there is no new WIFI firmware, the screen prompts No new firmware found.====
{{:upgrade_wifi_firmware:ota.jpg?direct&400|}}
====3. If there is new WIFI firmware, Begin ota updating... will be prompted on the screen.====
Wait 1 minute, after the firmware upgrade is complete, the screen will prompt OTA update completed.
If the screen prompts Firmware Upgrades Failed or more than 3 minutes, the upgrade does not end, please turn off the printer power, wait 10 seconds, then try again.

User Tools

Site Tools

Page Tools