For more products please visit http://www.weedo.ltd / https://www.weedo3d.com
Sidebar
x40:gcode_compatible
This is an old revision of the document!
X40 Gcode command compatibility list
\ \
| G0 | → G1 |
|---|---|
| G1 | Coordinated Movement X Y Z E |
| G2 | CW ARC |
| G3 | CCW ARC |
| G4 | Dwell S<seconds> or P<milliseconds> |
| G5 | Cubic B-spline with XYZE destination and IJPQ offsets |
| G10 | Retract filament according to settings of M207 (Requires FWRETRACT) |
| G11 | Retract recover filament according to settings of M208 (Requires FWRETRACT) |
| G12 | Clean tool (Requires NOZZLE_CLEAN_FEATURE) |
| G17 | Select Plane XY (Requires CNC_WORKSPACE_PLANES) |
| G18 | Select Plane ZX (Requires CNC_WORKSPACE_PLANES) |
| G19 | Select Plane YZ (Requires CNC_WORKSPACE_PLANES) |
| G20 | Set input units to inches (Requires INCH_MODE_SUPPORT) |
| G21 | Set input units to millimeters (Requires INCH_MODE_SUPPORT) |
| G26 | Mesh Validation Pattern (Requires G26_MESH_VALIDATION) |
| G27 | Park Nozzle (Requires NOZZLE_PARK_FEATURE) |
x40/gcode_compatible.1610170663.txt.gz · Last modified: 2021/01/09 13:37 by caojie
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
