Differences

This shows you the differences between two versions of the page.

--- x40:howto_use_cura [2022/04/20 15:02]
ayumi created
+++ x40:howto_use_cura [2022/04/21 16:50] (current)
ayumi
@@ Line 1: / Line 1: @@
-=====Connect Printer to Cura=====
+====== Connect Printer to Cura ======
-**You have purchased our Independent Dual Extruder 3D printer X40 LOL.//
+**You have purchased our Independent Dual Extruder 3D printer X40 LOL.
 Here is the method to Connect Printer to Cura**
+\\
+**If you still have questions, please contact our customer service. Email:salesservice@wiibooxtech.com**\\
+\\
+=====The first way : The network connection=====
-{{pdfjs 800px > ::connect_printer:0420-3.pdf}}//
+Step1: After configuring the network through the web page or Wiibuilder, obtain the IP address.（See “Set Up Wi-Fi Network” ）\\
+{{:x40:0419_1.png?400|}}\\
+\\
+Step2: Open the Cura(weedo). Click“Manage printers”, add “X40”.\\
+{{:x40:0421c1.png?400|}}\\
+{{:x40:0421c2.png?400|}}\\
+{{:x40:0421c3.png?400|}}\\
+\\
+Step3: Click“Connect OctoPrint ”,enter the IP address, and take a name. Click“Ok”.\\
+{{:x40:0419_.png?400|}}\\
+{{:x40:0419_4.png?400|}}\\
+{{:x40:0419_5.png?400|}}\\
+\\
+Step4: Click“Connect  ”, start to “MONITOR”. \\
+{{:x40:0419_6.png?400|}}\\
+{{:x40:0419_7.png?400|}}\\
+\\
+===== The second way : USB cable connection =====
+Step1: Connect the printer and computer with a USB cable.\\
+\\
+Step2: You need to download the CH340 driver (on the download page) for the first connection.\\
+{{:x40:0419_8.png?400|}}\\
+\\
+Step3: Open the Cura(weedo). Click“Manage printers”, add X40\\
+{{:x40:0421c1.png?400|}}\\
+{{:x40:0421c2.png?400|}}\\
+{{:x40:0421c3.png?400|}}\\
+\\
+Step4: Start to “MONITOR”.\\
+{{:x40:0421c5.png?400|}}
-**If you still have questions, please contact our customer service. Email:salesservice@wiibooxtech.com**

User Tools

Site Tools

Differences

Page Tools