x40:howto_use_cura []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Connect Printer to Cura ======

**You have purchased our Independent Dual Extruder 3D printer X40 LOL.
Here is the method to Connect Printer to Cura**
\\
**If you still have questions, please contact our customer service. Email:salesservice@wiibooxtech.com**\\
\\
=====The first way : The network connection=====

Step1: After configuring the network through the web page or Wiibuilder, obtain the IP address.（See “Set Up Wi-Fi Network” ）\\
{{:x40:0419_1.png?400|}}\\
\\
Step2: Open the Cura(weedo). Click“Manage printers”, add “X40”.\\
{{:x40:0421c1.png?400|}}\\
{{:x40:0421c2.png?400|}}\\
{{:x40:0421c3.png?400|}}\\
\\
Step3: Click“Connect OctoPrint ”,enter the IP address, and take a name. Click“Ok”.\\
{{:x40:0419_.png?400|}}\\
{{:x40:0419_4.png?400|}}\\
{{:x40:0419_5.png?400|}}\\
\\
Step4: Click“Connect  ”, start to “MONITOR”. \\
{{:x40:0419_6.png?400|}}\\
{{:x40:0419_7.png?400|}}\\
\\
===== The second way : USB cable connection =====

Step1: Connect the printer and computer with a USB cable.\\
\\ 
Step2: You need to download the CH340 driver (on the download page) for the first connection.\\
{{:x40:0419_8.png?400|}}\\
\\
Step3: Open the Cura(weedo). Click“Manage printers”, add X40\\
{{:x40:0421c1.png?400|}}\\
{{:x40:0421c2.png?400|}}\\
{{:x40:0421c3.png?400|}}\\
\\
Step4: Start to “MONITOR”.\\
{{:x40:0421c5.png?400|}}

User Tools

Site Tools

Page Tools