Differences

This shows you the differences between two versions of the page.

--- x40:howto_use_wiibuilder [2022/05/07 14:03]
ayumi
+++ x40:howto_use_wiibuilder [2022/05/07 14:14] (current)
ayumi
@@ Line 9: / Line 9: @@
 Step1: After configuring the network through the web page or Wiibuilder, obtain the IP address.（See “Set Up Wi-Fi Network” ）\\
-{{:x40:0419_1.png?400|}}\\
+{{:content:图片_1.png?400|}}\\
 \\
-Step2: Open the Wiibuilder. Click“WLAN Connection”, enter the IP address, click"Connect".\\
+Step2: Open the Wiibuilder. Click“WLAN Connection”, enter or choose the IP address, click"Connect".\\
-{{:x40:0421_6.png?400|}}\\
+{{:content:屏幕截图_2022-05-07_134517.png?400|}}\\
-{{:x40:0421w1.png?400|}}\\
+{{:content:屏幕截图_2022-05-07_134410.png?400|}}\\
 \\
 ===== The second way : USB cable connection =====
@@ Line 23: / Line 23: @@
 \\
 Step3: Open the Wiibuilder. Click“WLAN Connection”,choose "COM3"for Windows or "/dev/*****" for MacOS, click "Connect".\\
-{{:x40:0421w2.png?400|}}\\
+{{:content:屏幕截图_2022-05-07_134517_2.png?400|}}\\
-{{:x40:0421w3.png?400|}}
+{{:content:屏幕截图_2022-05-07_134716.png?400|}}\\
+===== The reason for the failure to connect to the network =====
+  - It is not possible to use the 5GWiFi network. It needs to operate at 2.4 GHz network frequency.
+  - Please turn off VPN.
+  - Please turn off Windows firewall settings, make sure the 3D printer and computer are the same subdomain.
+  - Mobile phones need to be operated with WIFI.The 3D printer and phones need to use the same subdomain.
+  - Keep the TF card inserted.
+  - WiFi name cannot be used in Chinese\\
+\\
+==== How to turn off the Windows firewall ====

User Tools

Site Tools

Differences

Page Tools