Differences

This shows you the differences between two versions of the page.

--- content:printing_setting [2020/08/28 15:15]
peter
+++ content:printing_setting [2020/09/21 13:45] (current)
@@ Line 1: / Line 1: @@
-=====Set XY Zoffset For Dual Nozzles=====
+=====Download Stl File & Print Out File=====
+====1.Download STL File====
+Go through [[http://https://www.thingiverse.com/|thingiverse]] for free stl file download.\\
+{{:print_your_first_sliced_model:pasted:20200828-012411.png}}\\
+Search the file you are like and download it.
+{{:print_your_first_sliced_model:pasted:20200828-012442.png}}
+====2.Load file into Wiibuilder====
+{{:print_your_first_sliced_model:pasted:20200828-012634.png}}
+====3.Set slicing parameters====
+Click Edit, click Material to select the right nozzle, and select a benefit color to simulate the color effect of the model.\\
+{{:print_your_first_sliced_model:pasted:20200828-012735.png}}\\
+Select the slice settings. Sets the Profile, to select the material type.\\
+For example Profile: High Quality; Material: PLA; Layer Height:0.15mm; Printing Speed:55; infill:10% ;Temp:200\\
+{{:print_your_first_sliced_model:pasted:20200828-013004.png}}\\
+Slice it and save to TF card, you can see the printing time and filament used for this model\\
+{{:print_your_first_sliced_model:pasted:20200828-013110.png}}\\
+====4. Insert TF card to Machine and select the Gcode file printing====
+{{:print_your_first_sliced_model:pasted:20200828-013205.png}}\\
+{{:print_your_first_sliced_model:pasted:20200828-013225.png}}\\
+You can preview information of the printing file before printing.
+{{:print_your_first_sliced_model:pasted:20200828-013244.png}}\\
+**Select Print**\\
+{{:print_your_first_sliced_model:pasted:20200828-013416.png}}
-When the new nozzle is replaced and the belt tension of the X is readjusted, the XY offset of the nozzle will change and the XY offset needs to be readjusted. The specific methods are as follows:\\
-Method One:\\
-X Coarse tune:\\
-Loading two-color filament in the left and right nozzle which is easy to observe.\\
-Print the two-color test file in the TF card, the file name is NozzleCoarseTune.gcode.\\
-Printer interface selection:\\
-The 351 parameters is selected by default for printing.\\
-{{:content:pasted:20200828-001523.png}}

User Tools

Site Tools

Differences

Page Tools