Differences

This shows you the differences between two versions of the page.

--- set_up_wifi_network:tina2 [2022/05/07 11:50]
ayumi
+++ set_up_wifi_network:tina2 [2022/05/18 11:11] (current)
ayumi
@@ Line 24: / Line 24: @@
 {{:set_up_wifi_network:0421_8.png?400|}}\\
 \\
-Step4: Turn on the 3D printer，print “wifi.gcode”.\\
+Step4: Turn on the 3D printer，print"wifi.gcode".\\
 {{:content:2022-5-7-1.png?400|}}\\
 \\
-Step5: After WIFICAM is connected the Internet, the obtained IP address will be displayed on the printer screen.
+Step5: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
 ===== Method 2: Manual editing =====
-Step1:Download this .gcode\\
+Step1:Download this ".gcode"\\
+{{ :content:wifi.gcode_11.08.51.zip |}}\\
-Step1: Enter your network password，click “Save”, save to TF card.\\
-{{:set_up_wifi_network:0421_8.png?400|}}\\
 \\
-Step4: Turn on the 3D printer，print “wifi.gcode”.\\
+Step2: Enter your home 2.4G network name and network password, save to TF card.\\
+{{:content:截屏2022-05-07_11.48.14.png?400|}}\\
+{{:content:截屏2022-05-07_11.48.49.png?400|}}\\
+\\
+Step3: Turn on the 3D printer，print “wifi.gcode”.\\
 {{:content:2022-5-7-1.png?400|}}\\
 \\
-Step5: After WIFICAM is connected the Internet, the obtained IP address will be displayed on the printer screen.
+Step4: After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
+\\
-===== Method 1. Using the APP distribution network =====
+===== Method 3: Using the APP distribution network =====
+Step1: Download the Andriod APP-Poloprint for the first time.\\
-====Download the Andriod APP-Poloprint1.3.1 for the first time====
+{{ :content:poloprintpro1.1.1-1019.apk.zip |}}\\
-App download: [[http://www.weedo.ltd/?page_id=3376&orderby=title&order=asc|External Link]]
+\\
-===After the download is completed, the installation is completed. After the installation is completed, the first time the application is opened, the interface is displayed. The wizard interface is an introduction to the use of instructions on the app. The specific usage requires a tutorial corresponding to the specific model. This tutorial is for Tina2===
+Step2: Search the network for the corresponding serial number.\\
-===Step 1: Enter the WIFI password in the network where the mobile APP brush WIFI settings interface (do not click OK first)===
+{{:content:screenshot_20220507_152457_com.android.settings.jpg?400|}}\\
+\\
+\\
+Step3: After the download is completed, the installation is completed.Open the APP，click"Printer wifi Setting",enter your home 2.4G network name and network password\\
+{{:content:图片16.png?400|}}\\
+\\
+Step4: Restart the machine. After WIFI is connected the Internet, the obtained IP address will be displayed on the printer screen.
+\\

User Tools

Site Tools

Differences

Page Tools